Gilders Paste - 30ml / 1.5oz
Colour:  Iris Blue

This wax-based medium can be used to add non-fading color or a gilded finish to materials such as Metal Castings, Filigree, Brass Stampings, Ceramics, Wood, Etched Glass, Polymer Clay, Resin and more!
It can be applied as-is to clean, dry, oil-free surfaces with a cloth, cotton swab, sponge, your finger... or thin it with paint thinner to create a paste, paint, stain or wash.
Smooth surfaces should be slightly roughened with fine grit sandpaper or steel wool before application.
Gilders Paste dries to the touch in 10-15 minutes and completely dries in 12 hours with no tacky residue.
One tin of Gilders Paste covers over 30 square feet of surface area.
Choose from 9 UV resistant colors which can be layered to create stunning and unique finishes and textures!

Frequently Asked Questions:

The product is hard, is there anything I can do to rejuvenate the product?

Yes, just add a few drops of either; paint thinner, mineral spirits, turpentine or Turpenoid (turpentine substitute) knife in and mix. You're ready to go. The ability to rejuvenate this product allows a long shelve life. There is no need to mix up the whole tin, just mix what you need as you need it. Gilders Paste goes a long way.

Important:
Do not use any oil base cleaners/solvents such as Turpenoid Natural. The oil content of these type of cleaners/solvents will not allow the Gilders Paste to dry and will remain wet or tacky for days to weeks. If you have accidentally used this type cleaner/solvent leave the tin open until completely dried out and then follow the suggestion for rejuvenation above.