$52.90
In Stock

Round Disc Cutter Set – 7 Imperial Sizes from 1/4" to 5/8"

Round Disc Cutter Set – 7 Imperial Sizes from 1/4" to 5/8"

Create clean, consistently shaped round discs for jewellery making, metalwork and craft projects with this seven-size disc cutter set. The punches are manufactured in imperial inch sizes, with approximate metric equivalents provided below for reference.

Designed for use with compatible sheet materials, this compact set provides a useful selection of diameters for creating earrings, pendants, charms, layered components and decorative pieces.

Place the material between the cutter plates, select the required punch and strike it with an appropriate hammer to cut the disc.

Disc Sizes:

  • 1/4" – approximately 6.35mm
  • 5/16" – approximately 7.94mm
  • 3/8" – approximately 9.53mm
  • 7/16" – approximately 11.11mm
  • 1/2" – approximately 12.70mm
  • 9/16" – approximately 14.29mm
  • 5/8" – approximately 15.88mm

Please note: This is an imperial-sized cutter set. The millimetre measurements shown above are approximate conversions only and should not be treated as exact metric cutting sizes.

Features:

  • Seven imperial round punch sizes from 1/4" to 5/8"
  • Approximate metric equivalents provided for reference
  • Designed for cutting compatible sheet materials
  • Recommended for soft sheet metal approximately 22 gauge or thinner
  • Stainless-steel construction
  • Produces round components in multiple diameters
  • Suitable for jewellery making, metalwork and craft projects

Key Benefits:

  • Create consistently shaped discs without cutting each one by hand
  • Seven sizes accommodate a variety of jewellery and craft designs
  • Useful for earrings, pendants, charms and layered components
  • Helps create matching pieces for coordinated jewellery designs
  • Compact set provides multiple cutting sizes in one tool

How to Use:

  1. Select the punch size required for your project.
  2. Place the material flat between the cutter plates.
  3. Insert the corresponding punch into the opening.
  4. Place the cutter on a firm, stable work surface.
  5. Strike the punch firmly with an appropriate hammer until the disc is cut.

Important: Material suitability depends on thickness, hardness and composition. Use with compatible materials and test on an offcut before beginning your project. Do not force the punches through hardened or excessively thick material. Wear suitable eye protection and keep fingers clear while striking.

(SKU17933)

SKU SKU17933
Video

More From This Category


Beadsmith Mighty Metal Hole Punch & Die Set – 7 Sizes
Qty:
EuroPunch Metal & Leather Hole Punch Pliers - 1.25mm
Qty: