Resin Craft by Me UV Resin Light - Portable Jewelry Curing Light with Timer

Resin Craft By Me - UV Resin Light

This compact 9W UV resin curing light features a built-in timer for jewellery-making projects using compatible UV resin. Its portable size makes it easy to move between your workspace, classes and craft get-togethers.

Power adaptor not included. The light uses a USB power cable and requires a suitable USB power source. Follow the product instructions when selecting an adaptor.

Features

• Power: 9W
• Power connection: USB power cable
• Timer settings: 10, 30 and 60 seconds
• Approximate dimensions: 152mm x 50mm x 50mm (6 x 2 x 2 inches)
• Compact design: Easy to move and store

Important curing information: The timer controls how long the light stays on; one timer cycle does not guarantee that your resin is fully cured. Follow your resin manufacturer's instructions for layer thickness and curing time. Additional cycles may be needed.

Directions for Use

1. Wear appropriate eye and skin protection as directed by the light and resin manufacturers.
2. Connect the USB power cable to a suitable USB power source.
3. Press the power button on top of the light: once for 10 seconds, again for 30 seconds, or a third time for 60 seconds.
4. Cure according to your resin manufacturer's directions, repeating the timer cycle as needed. Avoid touching uncured resin with bare skin.
5. Allow the cured piece to cool before handling.

Safety Warnings

• Cured resin may be hot. Allow it to cool before handling.
• Ultraviolet light hazard: Do not shine directly into eyes.
• Do not use if sensitive to UV light.
• Do not use near water. For dry locations only.
• Not intended for children aged 12 and under.
• Follow all safety instructions supplied with the light and resin.