Ombre Heart Resin Bracelet Project Kit

Ombre Heart Resin Bracelet Project Kit

Create a sparkling heart bracelet with this sweet little DIY resin jewellery project kit. Layer the three bags of crushed glass gems inside the heart-shaped bezel to create your own colourful ombre effect.

This kit contains the bracelet, heart bezel, decorative glass and small components needed for the featured design. Simply add your own UV resin and cure each layer beneath a suitable UV light.

A lovely bite-sized project for resin crafters who already have resin and a curing light, or an affordable addition to your existing jewellery-making supplies.

Kit Includes:

• 1 x open heart bezel
• 1 x adjustable chain bracelet
• 2 x jump rings
• 1 x piece of bezel tape
• 3 x bags of crushed glass gems

You Will Also Need:

• Clear UV resin
• UV curing light

Please note: UV resin and UV light are not included and must be purchased separately.

How to Make Your Bracelet:

1. Peel the backing from the bezel tape and firmly seal it across the back of the heart bezel.
2. Working on a protected surface, add enough UV resin to lightly coat the base of the bezel.
3. Cure beneath a UV light for approximately 60 seconds.
4. Add the crushed glass gems in layers to create your ombre design, applying additional UV resin as required.
5. Cure each layer for approximately 1 to 5 minutes, or until the resin is no longer tacky.
6. Once completely cured, gently remove the bezel tape and attach the finished heart to the bracelet using the jump rings.

Safety information: Use resin in a well-ventilated area and avoid contact with skin and eyes. Keep out of reach of children. Resin may be harmful if swallowed and is not edible. Cured resin may become hot. Store in a cool, dry place. Conforms to ASTM D4236. Not intended for children aged 12 years and under.